Thursday, April 11, 2019

Touch-points On How To Make Paper Beads

Touch-points On How To Make Paper Beads is a fun way to personalize your computer as well as to inspire yourself. You will find pictures of landscaping, celebrities, themes from cartoon characters, and much more. Just about anything you may be looking for is offered.

You want your desktop wallpaper to be crisp and effective. If you aren't careful you can end up putting up the wrong size and that will cause the photo to be distorted. Then it can be an eyesore instead of something grand to look at. With Touch-points On How To Make Paper Beads you should be able to just click on the information and download it instantly to your computer.

You can download Touch-points On How To Make Paper Beads for free. Some of them online are expensive but the bottom line is that there are so many for free that you shouldn't have to spend a dime on them.
By Matthew Bennett


There are a lot of fun things people can do when at home, particularly easy craft. This includes making good things out of junk. Below are some steps on how to make paper beads out of junk materials. Tools needed include glue, scissors, pencil or pen, varnish, ruler, string, an assortment of papers, paper plate, and dowel or toothpick

Firstly, tear a paper from the magazine or newspaper. Cut it into strips beginning from top to bottom using a paper cutter or scissors. Triangular shapes are more appropriate. A template can give you guidance on how to cut the strips. The bead width should be the base of the triangle.

Secondly, take a strip and roll it onto itself from the wide end using a toothpick or dowel. This forms a cylindrical shape. When you are through with the alignment, roll the piece back and apply some glue across the breadth using a hairbrush. To ensure the symmetry of the bead is achieved, roll the paper over the glue and make sure at each side the spirals are equal. If you want a freestyle design, you should not trouble over alignment and you can then let the strip be a bit off the center.

The third step is to stick the rolled piece to the tip of the triangle and ensure it stays tightly rolled. Before rolling the bead on your finger, make sure the end of the piece is stuck down, used light pressure to ensure that it is cylindrical and protected. If it does not stick tightly, apply another glue and hold the bead for a while to let the glue set.

The next step is to apply varnish to the bead on dry the glue. This makes it water resistant. It is prudent to swivel them around the cocktail stick so as to prevent them from sticking when completely dry. Ensure the glue dries completely and ensure it does not attach to something else. A toothpick stuck into a pincushion or some foam can also be used to shove the excess glue. A longer-lasting and glossier finish can be achieved by adding several coats.

After the beads are dry and the varnish is well set, remove them from the dowel and place them in strings. Sliding the beads off the cocktail stick is a safe way of removing the beads and ensuring the safety of your work. If some items untie, it shows that the paper was not wrapped or glued well. Think of putting them back to the cocktail stick and add more glue. Leave them to dry for some more hours.

One can create some more beads using the steps above so as to complete the project. You can also create long strings and use them for decors or make several beads for jewelry. For decorating your beads, you might consider adding paint on the outside of the bead and put some glitter to make them more gleaming.

A keen follow on this procedure gives you fine results as the items are delicate at times. They can also be used to make earrings, necklaces, and bracelets. You can also decorate your house with them. This is considered a good way of conserving the environment.




About the Author:



Related Posts Plugin for WordPress, Blogger...